Product Description
Raw materials and products
1.material character
The raw materials is base on the crude oil date sent by the customer and the evaluation made by the customer. The basic properties of the raw material are as follows:
| Analysis item |
Numerical value |
Test standard |
| Average density,g/cm3 15ºC |
0.7979 |
ASTM D4052 |
| Bottom density,g/cm3 15ºC |
0.7977 |
ASTM D4052 |
| Medium density,g/cm3 15ºC |
0.7978 |
ASTM D4052 |
| Condensation point |
-56ºC |
ASTM D2386 |
| Flash point |
44 |
IP.170 |
| sulphur %Mass |
0.0099 |
ASTM D4294 |
| colour |
+30 |
ASTM D156 |
| Sulphur alcohol, wt% |
0.0009 |
ASTM D3227 |
| water %VOL |
no |
2477-14 |
| Mechanical impurities |
no |
|
| Smoke point |
28 |
ASTM D1332 |
Real boiling data:
| Test standard |
ASTM-D86 |
| temperature(ºC) |
yield(%) |
| IBP(152) |
Initial boiling point |
| 175 |
10 |
| 197 |
50 |
| 235 |
90 |
| 245 |
FBP |
(the above information is provided by the customer, the whole data is not comprehensive, requiring additional data latter)
2.product and by0product summary
According to the raw material data provided by the customer, the product results obtained by the customer are summarized as follows:
Product distribution (specific needs to be tested according to the sample)
| Item |
Yield % |
| Fuel gas(LPG) |
1 |
| 200# solvent oil |
52 |
| Diesel fuel |
46.5 |
| wastage |
0.5 |
3.Product properities
200# solvent oil
| Item |
Numerical value |
| Density,kg*m-3 |
770-780 |
| Colour number |
+30 |
| Sulphur content,(ppm) |
<20(prediction, requires experimentation) |
| Aromatics content,m% |
<13 |
| Doctor test |
passed |
| Copper corrosion,grade(100ºC,3H) |
≤1 |
| Flash point(closed-mouth) |
<33 |
| Initial boiling pointºC |
140 |
| 98% distillation range temperatureºC |
200 |
Detailed Photos
Certifications
Company Profile
Wonrong Environmental Protection Technology Co., Ltd, is occupied in Petroleum refining, Pro-Environment, Chemical Technical Application, Technical Research and Development of the Project. Project design Equipment manufacturing and sales. The company has deep cooperation with Sinopec Shanghai Research Institute, and Nanjing Chemical Research Institute. Technology has always had a leading advantage in the industry. The company latest research and development of oil-gas phase directed catalytic cracking of waste engine oil regeneration technology, completed from the design, research and development volume output qualified diesel products.
Tire oil-gas phase catalytic separation of gasoline and diesel products all meet the national requirements of oil products. New type Thin film + fractional distillation refining and regenerating base oil technology of Carclazyte, New type Thin film + fractional distillation + NMP refining and regenerating base oil technology, the products has reached the international API standards.
The company is committed to Technology First, Quality First principle. Process calculation, equipment calculation and simulation test are carried out for each set of the technology and equipment. The design software used included: Aspen,Pro2,HTRI, HExtran, SW-6, CAD, Plant 3D.
){kind=link}